Line-Interactive UPS–NS-A,B
Product Introduction

 

Specially for personal computer

100% made in Taiwan it allows switching to UPS supply automatically when external power supply is off or abnormal over high or low voltage. It contains two steps AVR. Voltage regulation plus UPS provide quasi sine wave output offered lightening surge protection, noise filtering and short circuit protection for PC and servo and other small capacity IT equipment.

 

Feature:
       

Full low frequency working, no interference to your equipment

With mute switch

 

Free of any high frequency transforming power
circuit and won’t cause any high frequency
disturbance

 

Mute switch for 1.5 KVA and above capacities allowing switching off warning sound at power off
       

Built-in AVR offering wider applications

Lightning surge protecting device

 

Built-in AVR function provides automatic when the
mains is too high or too low-extra protection to
your equipment

 

It offers possibility of installing monitoring software to set saving and turning offIt has surge protection device and can effectively absorb 4500 A (8/20μs) and can effectively reduced the damage of thunder strike
       

With battery start function

Incorporated with DB9 communication interface

 

When external power is off, internal battery can
be applied to start machine

 

It offers possibility of installing monitoring software to set saving and turning off
       

With overload and short circuit protection

With auto-restart function

 

It has overload protecting device is capable of
cutting off power supply upon overload and short
circuit

 

When UPS off and power is supplied by internal battery, UPS will be off automatically when battery energy is exhausted. And when mains is resumed, UPS will re-start automatically
       

Multiple audio warning functions

Custom long time discharge model acceptable

 

At UPS off, battery low, both overload and short
circuit protecting device will have different
warning sound

 

If long time discharge needed, we can accept custom
order and can also add large current charging board
to short battery recharge time
       

Containing various LED indicating functions

With large starting current suitable for elevator of each brand

  For unit of 1.5KVA capacity or higher, the unit has
LED 5 indicating functions, including normal,
battery discharge, AVR actions, turning off,
overheating and battery power indication
  This series has other elevator specific model with
larger starting current and output is available 5 seconds after power off and with dry contact signal of power off and machine turning off
       

 

Application:

 

Personal Computer

IT Equipment Document Control

Work Station

Audio/Video Room Sales Management
System

 

Function Description:

 

With Battery
Booting Function
DB 9 Communication
Interface
With Lightening
Surge Protection
Free of Interference
at Low Frequency
Multiple Audio
Warning

After power off, UPS
DC can be used to
start to provide AC
power.

With DB9 com-
munication interface
port for software to
operate automatic
shut down

With lightening
surge protecting
element for the
equipment

In low frequency
design, free of oscil-
lation interference
to equipment
Different audio
warning to tell
situations of UPS

 

Model & Specification:

 

Model NS-A601 NS-A102 B-152 B-202 B-302
Capacity VA/Watts 600VA/360W 1000VA/600W 1500VA/900W 2000VA/1200W 3000VA/1800W
Input Voltage 110/115/120VAC or 220/230/240VAC
Voltage Range 83VAC~143VAC or 166VAC~286VAC
Frequency 47Hz~53Hz or 57Hz~63Hz
Output Voltage 110/115/120VAC or 220/230/240VAC±10%
Frequency 50Hz or 60Hz±1Hz
Waveform Simulated sine wave
Transfer Time <4ms
Outlets NEMA5-15R*2pcs or the other type NEMA5-15R*6pcs or the other type
Battery Battery Voltage 12V DC 24V DC 48V DC
Battery Type High Rating 12V/5AH 12V/4AH High Rating
12V/5AH
High Rating
12V/9AH
Battery Quantity 1 PCS 2 PCS 4 PCS
Back up Time
(Load with 1 PC)
15 mins 40 mins 60 mins 90 mins 120 mins
Recharging Time 8 hours to 90% after fully discharged
Function Line Conditioning
Regulation(AVR)
When input voltage too high or too low, it’s with rising or decreasing voltage function automatically
LED Display 1 LED: Normal (steady on)
Discharging (slow blinking)
Battery low (quick blinking)
Overload/Short/UPS
Cut-off (LED off)
10LEDs: Normal (Green)
Discharging (Green)
AVR on (Orange)
UPS cut-off (Orange)
Overheat (Red)
Battery level (5LEDs)
Alarm Buzzer on for Back-up mode, Battery low
Mute Switch No Yes (can be switched)
DC Start(Cold start) While mains black out, it can use internal batteries to turn on the UPS
Auto Restart UPS While mains recover, it can turn on automatically
Output Auto Delay No Yes (delay 5 seconds)
Overload/Short Protection Circuit Breaker(Line mode), Fuse and Electronic Circuit (back-up mode)
Lightning/Surge Protection 350J/10000A
Communication Port Dry Contact (it can be matched with RUPS-2000 software for windows 95/98/NT/2000/ME/XP/Vista)
UPS For Elevator No Yes (with huge starting current ability, 5 seconds delayed to send output,
dry contact function.  All cable connection are using terminal block)
Safety
Conformance
  EN62040-1-1
EN62040-2
Environment Temperature 0℃~40℃
Humidity 0%~95% (non-condensing)
Audible Noise  
Physical Net weight (KGS) 6.5 11.5 17.6 18.5 UPS:14
Battery Bank:14
Dimension:WxHxD (cm) 9.4x17x27 9.4x17x39 16x24x41 16x24x41
(2 sets)

User manual  

Outline Appearance

Brochure